Automotive Supplier Equipment

Find equipment for automotive suppliers who use processes including assembly, hot forming, interiors, lifting & positioning, part identification, stamping, thermoforming, welding, and workholding to produce parts used in automobile production.


Process Type:
Product Type:

magnetic gripper
Magnetic Gripper - Model 86560
  • No expensive tooling
  • Variability of part pick up
  • No electric lines required


  • Tags: "Workholding" "Lifting & Positioning" "Grippers" "Assembly"
Series CRS Pneumatic Compact Cylinder
Series CRS Pneumatic Compact Cylinder
  • Compact design for applications where space is limited
  • Up to six switch slots for flush switch mounting
  • Self-lubricating nitrile piston seal for long cylinder life


  • Tags: "Cylinders"
Series CTS Guided Pneumatic Compact Cylinder
Series CTS Guided Pneumatic Compact Cylinder
  • Compact design for applications where space is limited
  • Hard chrome plated guide shafts for anti-rotation and increased side load capacity
  • Up to six switch slots for flush switch mounting


  • Tags: "Cylinders"
Series GRC Rotary Parallel Pneumatic Gripper
Series GRC Rotary Parallel Pneumatic Gripper
  • Available in four sizes (imperial and metric) with two body and jaw styles
  • High grip force to weight ratio for efficient use of space and power
  • Internal jaw mechanism is constructed of hardened steel components and is enclosed for a minimum life of 10 million trouble-free cycles


  • Tags: "Grippers"
Series GRM Clamp with High Temperature Options
Series GRM Clamp with High Temperature Options
  • 24 hour delivery
  • Seals and lube rated to 200°C (392°F)
  • Ceramic coated tips minimize thermal transfer


  • Tags: "Workholding" "Transfer Clamps" "Thermoforming" "Stamping" "Lifting & Positioning" "Hot Forming" "Assembly"
Series GRM Pneumatic Clamp with Piggy Back Cylinder - C4400
Series GRM Pneumatic Clamp with Piggy Back Cylinder - C4400
  • Sliding jaw tooling to stretch material as it is gripped
  • Built upon standard GRM Clamp technology
  • Open/close sensing


  • Tags: "Transfer Clamps" "Interiors" "Assembly"
Series GRM Pneumatic Workholding Clamp
Series GRM Pneumatic Workholding Clamp
  • Highly modular design for countless configurations
  • Jaws lock in the closed position to ensure part retention
  • 24 hour delivery on standard models


  • Tags: "Workholding" "Transfer Clamps" "Stamping" "Lifting & Positioning" "Interiors" "Assembly"
Series GRR Guardian® High Capacity Pneumatic Parallel Gripper
Series GRR Guardian® High Capacity Pneumatic Parallel Gripper
  • Robust design provides high grip force and large moment capacities with low overall weight and withstands high impact and shock loads
  • Double acting for internal and external gripping, and unique dual air-passage piston rod design promotes rapid bore pressurization for short cycle times


  • Tags: "Lifting & Positioning" "Grippers"
Series KG Impact Sensor & Programmer
Series KG Impact Sensor & Programmer
  • Indicates cushion, flow control, and shock absorber failure
  • Prevents damage to product and equipment with failed components
  • Senses both failure and impending failure allowing planned shutdown for maintenance


  • Tags: None
Series PA Pneumatic Swing Clamp
Series PA Pneumatic Swing Clamp
  • Three-ball helix design distributes external loads
  • Compact sizes maximize available work space
  • 24 hour delivery


  • Tags: "Workholding" "Welding" "Swing Clamps" "Assembly"
Series PB Versatile Pneumatic Swing Clamp
Series PB Versatile Pneumatic Swing Clamp
  • Available in 25 to 50mm bores
  • Short and long strokes for design flexibility
  • Drop-in replacement for competitive models
  • Patented options maximize performance


  • Tags: "Workholding" "Welding" "Swing Clamps" "Assembly"
Series PC Tapered Pneumatic Swing Clamp
Series PC Tapered Pneumatic Swing Clamp
  • Tapered rod end allows for infinite arm positioning
  • Ideal for part holding
  • Mounting patterns on two surfaces
  • Available in left and right rotations


  • Tags: "Workholding" "Welding" "Swing Clamps" "Assembly"
Series PEC Pneumatic Toggle Clamp
Series PEC Pneumatic Toggle Clamp
  • Widest clamp force range in the industry
  • Constant clamp force compared to toggle designs
  • Locks closed to ensure part retention


  • Tags: "Workholding" "Welding" "Pneumatic Toggle Clamps" "Assembly"
Series PFC Pneumatic Frame Clamp
Series PFC Pneumatic Frame Clamp
  • Long or wide jaws for design flexibility
  • Constant clamping force over wide range
  • Optional weld covers for protection


  • Tags: "Workholding" "Welding" "Stamping" "Lifting & Positioning" "Frame Clamps" "Assembly"
Series PFC Pneumatic Frame Clamp - Mongo
Series PFC Pneumatic Frame Clamp - Mongo
  • Up to 52,000 lbs of total clamp force
  • High-force forming clamp
  • Long jaw travel positioning clamp
  • Ideal for large part applications


  • Tags: "Workholding" "Welding" "Stamping" "Lifting & Positioning" "Frame Clamps" "Assembly"
Series PLK Versatile Pneumatic Pin Clamp
Series PLK Versatile Pneumatic Pin Clamp
  • One actuator locates and holds part simultaneously
  • Enclosed finger design minimizes costly down time
  • Locking mechanism holds part if air pressure is lost
  • Drop in replacement opportunities


  • Tags: "Workholding" "Welding" "Pin Clamps" "Lifting & Positioning" "Assembly"
Series PLKD Pneumatic Disappearing Pin Clamp
Series PLKD Pneumatic Disappearing Pin Clamp
  • Main pin retracts fully into part support for easy part removal
  • Standard pin diameters from 12.5 to 24.5mm
  • Fingers may extend and retract independently of the main pin


  • Tags: "Workholding" "Welding" "Pin Clamps" "Lifting & Positioning" "Assembly"
Series PNC Pneumatic Identification Stamping Clamp
Series PNC Pneumatic Identification Stamping Clamp
  • Cost effective solution to comparable products
  • Quiet operation
  • Up to 26,000 pounds of total clamp force
  • Stamps characters into draw quality steel


  • Tags: "Stamping" "Part Identification" "Frame Clamps"
Series PNC Pneumatic Identification Stamping Clamp - Mongo
Series PNC Pneumatic Identification Stamping Clamp - Mongo
  • Up to 60,000 lbs of total clamp force
  • Stamping and crimping opportunities for many material types
  • Economical solution to comparable hydraulic and laser marking systems


  • Tags: "Stamping" "Part Identification" "Frame Clamps"
Series PSP Pneumatic Shot Pin Cylinder
Series PSP Pneumatic Shot Pin Cylinder
  • Adjustable bearing system can be used to make worn-in units "like new"
  • Internal porting and shock absorption eliminates the need to adjust cushions or flow controls
  • Superior off-center part locating and positioning


  • Tags: "Welding" "Lifting & Positioning" "Cylinders" "Assembly"
Series RA High Load Pneumatic Rotary Actuator
Series RA High Load Pneumatic Rotary Actuator
  • High axial and radial bearing loads
  • Zero backlash at ends of rotation
  • Wide variety of options and accessories


  • Tags: "Rotary Actuators"
Series SD/SE Versatile Thruster Pneumatic Slide
Series SD/SE Versatile Thruster Pneumatic Slide
  • Offered in short or long body in five bore sizes
  • Available with standard or oversize shafts
  • Standard dowel pin holes for ease of mounting


  • Tags: "Linear Slides"

Select another Process or Product Type.
No products for this combination of filters at this time.

Resources

None Available

What is an ML or C number?

An ML or C number is given to a special unit at PHD that was uniquely made to our customer’s specifications. PHD is proud to offer our customers variations of our standard product range. Whatever your application, PHD is likely to have your solution already in our database of over 35,000 MLs!

Do you have an application with a specific need?

For assistance in building your unique solution and to obtain a quote, please contact us.