Switches - Sensors

Change Type: Name Featured

< Sort by Name or Featured

Change Display:

Display Grid or List >

• 

  Series KG

  Series KG Impact Sensor & Programmer

  Series KG Impact Sensor
  The PHD Series KG Impact Sensor easily attaches to and monitors any piece of equipment that has motion. Featuring single-axis/bi-directional sensitivity, the sensor attaches to the moving part of a machine or device and monitors impact. A PLC can interpret the signal to warn of erratic operation or shut down a system to prevent catastrophic failure.
  
  KG Programmer
  Using the KG Programmer, the KG Impact Sensor also can measure an impact and relay that value to the user. A single programmer has the ability to service an unlimited number of impact sensors throughout an entire plant.

  Series KG 1
• 

  Series 5360

  Series 5360 Reed Proximity Switches

  Series 5360 Reed Switches are available in either AC or DC models. They are ideal for use as inputs for many types of sequencers and programmable controllers. In some cases, they can be used to drive some relays or valve solenoids. However, electrical transients (inrush currents or line spikes) associated with inductive or capacitive loads can damage and shorten the life of the switch.

  Series 5360 2
• 

  Series 1750

  Series 1750 Reed Proximity Switches

  Series 1750 Reed switches are available for use on most Tom Thumb and PHD products for simple interfacing to many types of electrical controllers. These switches are available as either 10-30 VDC or 110-120 VAC models for simple interfacing to sequencers and programmable controllers.

  Series 1750 3
• 

  Series 5580

  Series 5580 Hall Effect Proximity Switches

  Series 5580 Hall Effect Proximity Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Hall Effect Switches are solid-state, there are no moving parts to wear out. The switches offer an infinite number of trouble-free operations. Hall Effect Switches operate on DC current only.

  Series 5580 4
• 

  Series 5580

  Series 5580 Reed Proximity Switches

  Series 5580 Reed Switches are available in a DC model. They are ideal for use as inputs for many types of sequencers and programmable controllers. In some cases, they can be used to drive some relays or valve solenoids. However, electrical transients (inrush currents or line spikes) associated with inductive or capacitive loads can damage and shorten the life of the switch.

  Series 5580 5
• 

  Series 6250

  Series 6250 Solid State Proximity Switches

  Series 6250 Solid State Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Solid State Switches operate on DC current only.

  Series 6250 6
• 

  Series 5360

  Series 5360 Hall Effect Switches

  Series 5360 Hall Effect Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Hall Effect Switches are solid-state, there are no moving parts to wear out. They offer an infinite number of trouble-free operations. Hall Effect Switches operate on DC current only.

  Series 5360 7
• 

  Series 5360

  Series 5360 Solid State Proximity Switches

  Series 5360 Solid State Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Solid State Switches operate on DC current only.

  Series 5360 8
• 

  Series 62002

  Series 62002 Reed Proximity Switches

  Series 62002 Reed Switches are available in a DC model. They are ideal for use as inputs for many types of sequencers and programmable controllers.

  Series 62002 9
• 

  Series JC1SD

  Series JC1SD Solid State Switches

  Series JC1SD Switches fit into 4 mm switch slots and are solid state providing long life. These switches are offered in 10 – 30 VDC current sinking (NPN) and current sourcing (PNP) versions for simple interfacing to system controllers and replaces PHD Series 6790 Switches (excluding AC applications).

  Series JC1SD 10
• 

  Series JC1ST

  Series JC1ST Teachable Sensors

  Series JC1ST Teachable Switches fit into 4mm switch slots and feature two programmable outputs. The switch is solid state design and is simply mounted in a convenient location, such as middle of travel, then actuator is placed in first desired position and first output is set. The actuator is placed in the second desired position and the second output is set. Outputs retain settings even after power interruption.

  Series JC1ST 11
• 

  Series 6790

  Series 6790 Reed Proximity Switches

  Series 6790 Reed Switches are available in 65 - 120 VAC model for simple interfacing to sequencers and programmable controllers. They can be used to directly drive some types of relays or valve solenoids within the switch specifications stated. This design provides saving space and mounting versatility, the round switch fits into grooves in the body of the actuators.

  Series 6790 12
• 

  Series 6250

  Series 6250 Reed Proximity Switches

  Series 6250 Reed Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. These switches offer both 120 VAC or 10 to 30 VDC sink and source operation for maximum flexibility in interfacing with various electronic controls. Special current limiting feature is designed into each switch for protection against potential current inrush damage to switch components.

  Series 6250 13
• 

  Series 1750

  Series 1750 Solid State Switches

  Series 1750 Solid State switches are available for use on most Tom Thumb and PHD products for simple interfacing to many types of electrical controllers. These switches are offered in 10-30 VDC current sinking and current sourcing versions for simple interfacing to electronic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Constant amplitude output allows use with most digital logic systems.

  Series 1750 14
• 

  NFPA Brackets

  NFPA Brackets for Series 1750 Proximity Switches

  These brackets allow for the Series 1750 Reed and Hall Effect Switches to be mounted to 1-1/2" [38.1 mm] to 8" [203.2 mm] bore NFPA Cylinders.

  NFPA Brackets 15
• 

  Series 9800

  Series 9800 Hall Sensor & Set Point Module

  Hall Sensor provides independent and fully adjustable multiple position sensing on Series 8400 Angular Grippers, Series 190 & 191 Parallel and 190 Angular Grippers, Series 5300 Oval Grippers, and all Rotary Actuators and Multi-Motion Actuators. The Set Point Module provides independent adjustment of two set point positions from two sensors or allows one set point module to interface with two actuators. It also can be used with a single unit providing 4 adjustable set points throughout jaw travel or rotation. Additionally, the solid state electronics with Hall Effect sensing technology provide for an infinite number of trouble-free cycles.

  Series 9800 16
• 

  DC Inductive Proximity Switches

  DC Inductive Proximity Switches

  These switches offer high reliability provided by solid state inductive sensing technology and are suitable for plant environments where dirt and contamination create difficulties for electromechanical and other types of switches.

  DC Inductive Proximity Switches 17