Classic

Change Type: Name Featured

< Sort by Name or Featured

Change Display:

Display Grid or List >

Classic Pneumatic & Hydraulic Automation Solutions Offered by PHD, Inc.

• 

  Series AVS, HVS, AS

  NFPA Series AS, AVS, HVS Tie Rod Hydraulic or Air Cylinder

  Spherical Mount Cylinders provide a spherical mount on the cap end of a cylinder. Spherical rod ends may be ordered separately to get the spherical mounting on both ends. This mounting allows for misalignment as well as pivoting movement.

  Series AVS, HVS, AS 1
• 

  Series EA, EL, EH, ES

  NFPA Series EA, EL, EH, ES Tie Rod Hydraulic or Air Cylinder

  Heavy Duty Cylinders (3/4", 1-1/8", and 1-3/8" Bore Sizes) feature cartridge-type bushings and hard chrome-plated alloy steel piston rods for high cycle and side load applications. Units are available in a wide range of mounting styles and options.

  Series EA, EL, EH, ES 2
• 

  Series NEAG, NEHG Tom Thumb©

  Series NEAG, NEHG Non-Rotating Pneumatic or Hydraulic Tie rod Cylinder (1-1/8 & 1-3/8 inch Bores)

  Tom Thumb© Non-Rotating Rod Cylinders incorporate an internally contained precision spline assembly and a hollow piston rod that eliminates the need for outriggers and external attachments. They can be specified in various mounting styles with a wide range of options available.

  Series NEAG, NEHG Tom Thumb© 3
• 

  Series O

  Series O Compact Oval Pneumatic Cylinder

  Compact Oval Cylinders (3/4", 1", and 1-1/4" equivalent bore sizes) are both short and narrow. These compact cylinders provide high forces with their oval piston construction. Compact Oval Cylinders are ideal for tight applications where cylinder length and width are critical.

  Series O 4
• 

  Series 190 A

  Series 190 Angular Pneumatic Gripper

  Compact size is ideal for handling small parts in confined areas. Double-acting for either internal or external gripper applications.

  Series 190 A 5
• 

  Series 7900 A

  Series 7900 Angular Pneumatic Gripper

  Double-acting for either internal or external gripper applications. Close tolerance jaw mechanism eliminates jaw play. Simple construction allows the grippers to be easily repaired in the field.

  Series 7900 A 6
• 

  Series 7900 P

  Series 7900 Parallel Pneumatic Gripper

  Double-acting for either internal or external gripping applications. Rugged jaw and body construction can withstand high impact and shock loads.

  Series 7900 P 7
• 

  Series 8600 A

  Series 8600 Angular Pneumatic Gripper

  Double-acting for either internal or external gripper applications. Rugged jaw and body construction can withstand high impact and shock loads.

  Series 8600 A 8
• 

  Series 8600 P

  Series 8600 Parallel Pneumatic Gripper

  Double-acting for either internal or external gripper applications. Designed for applications where gripper weight and size are critical.

  Series 8600 P 9
• 

  Series 018075, 018050, 018375

  Series 018075, 018050, 0180375 Pneumatic Miniature Rotary Actuator & Air/Oil Miniature Rotary Actuator

  PHD Miniature Rotary Actuators are lightweight, compact units for small part orientation or part turn over. Adjustable stops provide 0¦ to 180¦ rotation for pneumatic use. Also available in 3 Position and Air/Oil Tandem versions.

  Series 018075, 018050, 018375 10
• 

  Series B

  Series B Hydraulic, Air/Oil Tandem, or Pneumatic Linear Slide

  Two hardened, precision ground shafts are used to provide a precision rugged support for the slide saddle. Series B Slide can be used as the base component of a modular system.

  Series B 11
• 

  Series C

  Series C Linear Pneumatic Slide Powered by Magnetically Coupled Rodless Cylinder

  The built-in rodless cylinder saves space by eliminating the need for an externally mounted cylinder. The result is a compact, low profile slide which is easily integrated into your design.

  Series C 12
• 

  Series M

  Series M Pneumatic or Air/Oil Tandem Linear Slides

  Compact lightweight design uses two cylinders built into the moving slide saddle to produce a high thrust-to-weight ratio. Fluoropolymer composite bearings require no lubrication for low maintenance.

  Series M 13
• 

  Series N

  Series N Compact Pneumatic Linear Slide Powered by a NFPA Tie rod Cylinder

  Series N Slides have external guide shafts that ride in an anodized aluminum alloy block providing a non-rotating tooling plate on the end of the standard cylinder. The rugged construction of the Tom Thumb« Cylinder and wide range of options provide long slide life.

  Series N 14
• 

  Series R

  Series R Pneumatic, Hydraulic, or Air/Oil Tandem Linear Slide

  The Series R Slide is a rugged, precision linear slide. Four linear ball bushings allow two hardened precision ground shafts to move smoothly while supporting the tool plate and attached loads. Shaft seals are provided to protect the ball bushings from external contamination. A tooling plate with both tapped and counterbored holes permits the easy attachment of various types of fixturing.

  Series R 15
• 

  Series SGxM

  Series SGxM Linear Pneumatic Slide Powered by a Rodless Cylinder

  Our Series SG Slide with Rodless Cylinder provides 50% space savings and high load carrying capability. The Series SGxM cylinder is standard with cushions on both ends and a magnetic piston. All units are shock absorber ready.

  Series SGxM 16
• 

  Series T/TSO8

  Series T Linear Pneumatic, Hydraulic, or Air/Oil Tandem Slides

  Two hardened, precision ground shafts are used on both sides of the piston rod to provide a rugged powered linear slide. Four linear ball bushings allow the shafts to move smoothly while supporting the tool plate and attached loads.

  Series T/TSO8 17